Inspection / Testing / Maintenance – ITM
Inspection / Testing / Maintenance – ITM is one of our hottest classes to date. It is for any body with industrial refrigeration experience that wants to get a better grasp of mechanical integrity requirements to their system. This class is available in person and online. No prerequisite are required. We call this certification
ITM – Inspection / Testing / Maintenance for R-717 Systems
The Inspection / Testing / Maintenance for R-717 Systems course entails a copy of the latest edition industrial ammonia refrigeration manuals hand selected by ARTS. These manuals are for the student to keep and reference not only during the class but their entire career. Topics to be covered are as follows:
Get a Quote Today @ this link
-
Responsibility for Compliance
- CMMS(s)
- ITM
- Compliance Schedule(s)
- Frequency of Inspections and Tests
- Daily
- Weekly
- Monthly
- Quarterly
- Semi-annual
- Annual
- Bi-annual
- Tri-annual
- Five Years
- Ten Years
- Inspection and Testing Required Documentation
- History of Deficiencies
- Record Keeping Requirements
- Refrigeration System Records
- MIEL
- SSEL
- Inspection Requirements
- Testing Requirements
- Maintenance Requirements
- ITM examples
-
Equipment ITM Requirements
- ITM – Screw Compressors
- ITM – Reciprocating Compressors
- ITM – Rotary Vane Compressors
- Test Safety Systems
- Screw
- Recip
- Vane
- Permitted Test Methods
- Non Permitted Test Methods
- ITM – Liquid Pumps
- ITM- Condensers
- ITM – Evaporators
- ITM – Pressure Vessels
- NDT – Pressure Vessels
- Corrosion Pressure Vessels
- Corrosion Allowance Pressure Vessels
- 25%
- 50%
- 75%
- Suitable for Continued Use
- Re-Rate Pressure Vessel
- Repair Pressure Vessel
- Retire Pressure Vessel
- Replace Pressure Vessel
- ITM – Piping
- Piping Damage
- Piping Corrosion
- Preparing Pipe
- Pitting in Piping
- Insulated Piping
- Internal Pipe Loss
- NDT Techniches
- ITM – Hoses – Ammonia Use
- ITM – Hoses – Non Ammonia Use
- ITM – Valves
-
ITM Safety Systems
- Ventilation System
- Lights
- Alarms
- Equipment E- Stops
- Intake Luevers
- Ammonia Detection System
- Shunt Trip
- All switches
- Emergency Shutdown Switches for Machinery Room
- Computer Controlled Processors
- Eyewash Showers
- High Level Cut-Outs
- Low Level Cut-Outs
- High Discharge Pressure Cut-Outs
- Low Discharge Pressure Cut-Outs
- Low Suction Pressure Cut-Outs
- High Oil Pressure Cut-Outs
- High Discharge Temperature Cut-Outs
- Minimum Oil Pressure Differential Cut-Out
- Amp Factor Protection Cut-Out
- Gas Defrost System Steps and Timing
- Low Oil Temp Cut-Out
- High Oil Temp Cut-Out
- Illumination
- Camera System
- Fire Suppression Systems
- ITM – Relief Valves
- Frequencies
- Replacement Requirements for Discharge to atmosphere
- Service Life of a PRV
- Replacement requirements when discharged
- Bench Testing
- Hydrostatics
- ITM – Purgers
- ITM – Secondary Coolants
-
Safety Checklists (Originally Bulletin 109 Forms)
- Compressors
- Condensers
- Evaporators
- Pumps
- Pipes
- Valves
- Vessels
- Purgers
-
Water Purity Inspections
- Detection
- Sampling Locations
- Sampling Procedures
- Removal of Water
-
Pressure Shock
- Hydraulic Shock
- Trapped Liquid
- Sudden Liquid Deceleration
- Vapor-Propelled Liquid
- Hot Gas
-
-
- Pressure Vessels
- Design
- Procedures
- Testing
- Identification
- Nameplate
- Installation Considerations
- Piping
- Design
- Pipe
- Tubing
- Fittings
- Flanges
- Valves
- Strainers
- Hangers
- Supports
- Isolation
- Location of Piping
- Design
-
Overpressure Protection
- Pressure Relief Devices
- Pressure Relief Protection
- Pressure Relief Piping
- Pressure Relief Discharge
- Hydro-static Over pressure Protection
ITM – Inspection / Testing / Maintenance for R-717 Systems
Register Today @ this link